Sudan 25TPH Alluvial Gold Washing Plant
JXSC has provided a successful 25TPH alluvial gold washing plant in Sudan. We design the gold wash plant process flowchart & plant layout drawing according to ore conditions, provide a complete set of plant machines and send Chinese engineers to the mine site for plant installation & commissioning guidance.
Introduction
Minerals: Alluvial Gold
Capacity: 25 TPH
Process: The raw material is the sand type without sticky clay. It can be washed clean easily. The gold size is a very small fine. So JXSC washes the mineral ore and uses a gold centrifugal concentrator, shaking table, and sluice box to recover gold.
Solutions & Process
Alluvial Gold Wash Plant
- The raw material is without sticky clay, so we use a trommel screen to wash the sand and sieve out some bigger particles.
- Then the undersize slurry from the trommel screen will go to the gold centrifugal concentrator by gravity, for the primary concentration of gold.
- The concentrate ore from the centrifugal machine will go to the shaking table for final separation, they can get very pure gold.
- The bigger particles are transferred away by the belt conveyor
- The tailings from the gold centrifugal concentrator come to a gold sluice box to get some gold from the tailing.
Equipment Lists
Trommel screen – 1 set
Gold centrifugal concentrator – 1 set
Shaking Table – 1 set
Gold Sluice box – 1 set
Main Equipment Used in This Case
