This setup is a rock gold process plant.

• The plant is configured with a hopper connected to 1 electromagnetic vibrating feeder under the hopper to feed materials more evenly into the coarse jaw crusher.
• The coarse jaw crusher crushes the big stone to less than 100mm, and the output is transported to the fine jaw crusher via a belt conveyor.
• The first crushed materials go to the fine jaw crusher, which crushes them to less than 30 mm fineness.
• Materials less than 30mm enter the transfer bin and then go to the hammer crushers, which are crushed to a 0-2 mm range.
• The materials go to the gold centrifugal concentrator for the first separation.
• Tailings of centrifugal concentrator go to sluice box for recovering more gold;
• The centrifugal concentrator and sluice box concentrates are sent to the shaking table to concentrate gold.
• The shaking table is a gravity equipment for recovering gold, with a very high recovery rate. It is very friendly to the environment.